Route the order to one eligible location when it can reserve every line and hand the parcel to the carrier by the promised dispatch deadline at an acceptable total cost. Consider a split when eligible locations can dispatch the lines separately on time and you can manage the extra cost, customer communication, and tracking. Hold the order when you cannot verify a required condition or when an essential line will miss the promise. Give every hold an owner and a next decision time.
Screen locations against the checkout promise
Start with the exact storefront variant, quantity, destination, shipping service, and packaging requirements. Confirm that each candidate location covers the destination, has enough stock, and can meet the mandatory requirements. For a personalized item or bundle, check that the location can fulfill the complete configuration. If the location cannot meet a requirement that can be relaxed, obtain the required approval before routing.
Work backward from the promised dispatch date to allow time for the location to receive the order, reserve stock, pick the items, and hand the parcel to the carrier. Use the cutoff for physical handover. In a hypothetical Thursday dispatch example, a warehouse may print a label on Thursday and still miss the carrier handover. Record operating days and handover cutoffs alongside the products and shipping lanes each location handles. If you are discussing support with a provider, send a representative order file and mark which requirements allow exceptions with approval. Order fulfillment support
Choose whether to route together, split, or hold
Compare total cost and the customer promise only after screening locations. Shopify describes how its routing rules prioritize fulfillment locations and can minimize split fulfillments. Use the table to decide what your team should do with the order, then confirm acceptance with the receiving location. Shopify order routing documentation
| Order condition | Default decision | What to verify |
|---|---|---|
| One eligible location can dispatch every line on time | Route together if total cost is acceptable | Stock reservation, packaging requirements, and carrier handover cutoff |
| Separate eligible locations can dispatch the lines on time | Compare a split with the next eligible option | Extra charges, whether the customer can use the items separately, and how each parcel will be communicated and tracked |
| An essential line will miss the promise or a required condition is unresolved | Hold for review | Whether a revised dispatch date, partial shipment, or cancellation is possible and whose approval is required |
Hypothetical example. A customer orders a bottle and a replacement lid. Supplier A can dispatch the bottle today and has no lids. Supplier B can dispatch both tomorrow within the promise. Route both to B if the combined cost and service meet your target. If B misses the window, check whether A and another approved location can dispatch separately on time. Consider whether the customer can use the bottle without the spare lid, how you will share both tracking numbers, and what the second parcel does to your margin. Hold a kit sold as one item until all components are available together unless the customer explicitly agrees to an alternative.
Verify acceptance before retrying or rerouting
Give each handoff a unique order reference. Log the send time, receiving location, lines, quantities, and acknowledgment. An order can sit unacknowledged in a feed or spreadsheet, so verify that the supplier accepted responsibility and reserved stock.
If a request times out, look up the reference with the original location before retrying. A duplicate request can produce two parcels. Route to a backup only after you verify that the first location did not accept the order or it confirms cancellation. If the location reports less stock than expected, follow your documented stockout process before reopening sales for the affected variant. Sellable inventory and stockout process
Give each hold a decision time and track each parcel
For each held order, record the order reference, the reason for the hold, the owner, and the next review time. Set that time before the promise expires. Reasons can include unconfirmed stock, address review, unavailable packaging, a missed cutoff, or an unanswered cancellation. Record who can authorize a split and which changes require customer approval. Use a shared queue with clear permissions during the pilot. Consider automating reminders once you know which exceptions recur often enough to justify a rule.
After release, record the order reference, package reference, carrier, tracking number, and lines in each parcel. Update status at the package level so that the first label does not mark the whole order complete. Document how staff should label and check multiple packages before the pilot. Picking, packing and labeling instructions
Pilot the rules and brief prospective providers
Run one normal order, one split candidate, one cancellation after acknowledgment, and one supplier timeout. For each, record the expected location, actual acknowledgment time, parcel count, and customer-facing status. Verify that a retry creates no duplicate work and that the final tracking message accounts for every parcel. Compare the added cost of a second parcel with the cost of holding or rerouting. Expand to more SKUs once the team can explain each exception and recover without guessing.
When requesting a quote, include a sample multi-line order, your dispatch promise, and an example of an item you would allow to ship separately. Ask the provider to explain how it would route routine orders and which exceptions would need your approval. Request a fulfillment quote
The operating examples are hypothetical.